Neighbor Update-Source; Neighbor Version - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NEIGHBOR UPDATE
neighbor {<ip-address>|<peer-group-name>} update-source
<inteface-name>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command is used to
configure the software to allow BGP sessions to use a particular interface for TCP
connections.
P
ARAMETERS
Parameter
ip-address
peer-group-name
interface-name
D V
EFAULT ALUE
By default, IP address of the interface connected to neighbor is used for TCP
connection.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 update-source
GigabitEthernet 7/0

NEIGHBOR VERSION

neighbor {<ip-address>|<peer-group-name>} version <4-4>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command configures
neighbor's BGP version.
P
ARAMETERS
Parameter
ip-address
peer-group-name
4-4
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
SOURCE
IP address of the BGP-speaking neighbor.
Name of a BGP peer group.
Name of the interface with its slot/port or interface number.
IP address of the BGP-speaking neighbor.
Name of a BGP peer group.
BGP version number. This is always set to 4.
Alcatel-Lucent

neighbor update-source

Description
Description
Beta
435