Encapsulation - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

ENCAPSULATION

encapsulation {frame-relay|ppp|hdlc|mlfr <bundle_id>|mlppp
<bundle_id>}
D
ESCRIPTION
This command is entered in the Interface Configuration mode to set encapsulation
on the serial interface.
P
ARAMETERS
frame-relay
ppp
hdlc
mlfr <bundle_id>
mlppp <bundle_id>
D V
EFAULT ALUE
Default is HDLC.
E
XAMPLE
The following example sets the encapsulation to FR:
ALU(config-if serial 0/0:0)# encapsulation frame-relay
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Sets the encapsulation to Frame Relay.
Sets the encapsulation to Point to Point
Protocol.
Sets the encapsulation to High Level
Data Link Control.
Sets the encapsulation to Multi-link
Frame Relay.
Sets the encapsulation to Multi-link
Point-Point Protocol.
Beta
encapsulation
239