Access-List (Standard) - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

D V
EFAULT ALUE
By default, no access list is configured.
E
XAMPLE
ALU(config)# access-list 101 permit ip 162.168.0.0
255.255.0.0 170.170.0.0 255.255.0.0
- (
ACCESS LIST STANDARD
access-list {<1-99>|<1300-1999>} {deny|permit} {source-ip-
address <network-number>|ip-address/prefix-length|any|host
<host-ipaddress>}[log]
D
ESCRIPTION
This command is used to configure a Standard Access-list. Standard Access-list
uses only source IP address.
P
ARAMETERS
Parameter
{<1-99>|<1300-
1999>}
deny
permit
source-ip-
address
<network-number>
ip-address/
prefix-length
any
host-ipaddress
log
D V
EFAULT ALUE
By default, no access list is configured.
E
XAMPLE
ALU(config)# access-list 1 deny 1.0.0.0/8
ALU(config)# access-list 2 permit 20.0.0.0/8
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
)
Access list number.
Denies access for matching conditions.
Permits access for matching conditions.
Source IP address network.
Source IP address network.
Match all source network.
Match only specified IP address.
If access list is matched, logs the message.
Alcatel-Lucent

access-list (standard)

Description
Beta
337