Channel-Group - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
T1E1 Line Card
-
CHANNEL GROUP
channel-group <0-23> timeslots <1-24> speed [56K|64K]
D
ESCRIPTION
This command is entered in the controller configuration mode to create channel-
groups that vary from 0-23 and set timeslots that vary from 1-24. Creating the
channel group and defining the time slot will enable the interface on that
controller.
P
ARAMETERS
0-23
1-24
56K|64K
D V
EFAULT ALUE
Default speed is 64kbps.
E
XAMPLE
1. Variations of the channel-group to associate different timeslots with the
serial interface are shown:
To associate all the timeslots with the controller:
ALU(config-controller T1)#channel-group 0 timeslots 1-24
To associate contiguous timeslots with the controller:
ALU(config-controller T1)#channel-group 0 timeslots 1-10
ALU(config-controller T1)#channel-group 0 timeslots 1,2,3
To associate non-contiguous timeslots with the controller:
ALU(config-controller T1)#channel-group 0 timeslots 1,4,20
224
Beta
Parameter
Alcatel-Lucent
Description
The number of channels that can be
configured on the controller.
Range of the timeslots that can be
associated with the controller. Could be
specified as contiguous: 1,2,3 or 1-3 or
could be specified as non-contiguous:
1,4,7.
The speed of the underlying DS0s: 56
kbps or 64 kbps. Default speed is 64
kbps.
OmniAccess 700 CLI Command Reference Guide
Beta