Show Ip Ospf Virtual-Links - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First
E
XAMPLE
The following is sample output from the 'show ip ospf summary-address'
command:
ALU# show ip ospf summary-address
OSPF Process 1, Summary-address
192.175.0.0/255.255.0.0 Metric -1, Type 2, Tag 4 2.0.0.0/
255.0.0.0 Metric 20, Type 2, Tag 0 router-2(config)#
SHOW IP OSPF VIRTUAL
show ip ospf [<1-65535>] virtual-links
D
ESCRIPTION
This command displays parameters and the current state of OSPF virtual links.
P
ARAMETERS
1-65535
E
XAMPLE
The following is a sample output from the 'show ip ospf virtual-links' command:
ALU# show ip ospf virtual-links
Virtual Link VLINK to router 6.6.6.6 is up
Run as demand circuit
DoNotAge LSA not allowed
Transit area 1, via interface GigabitEthernet7/1, Cost of using 1
Transmit Delay is 1 sec, State POINT-TO-POINT
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:04
Adjacency state FULL
Retransmission queue length 2, number of retransmission 0
ALU#
Virtual Link to router 6.6.6.6
is up
Transit area
504
Beta
-
LINKS
Parameter
Parameter
Alcatel-Lucent
Description
Process ID. If this argument is included,
only information for the specified routing
process is displayed.
Description
Specifies the OSPF neighbor, and if the
link to that neighbor is up or down.
The transit area through which the virtual
link is formed.
OmniAccess 700 CLI Command Reference Guide
Beta