Crypto Key Import Rsa Name; Crypto Map - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
IP Security - Virtual Private Network

CRYPTO KEY IMPORT RSA NAME

crypto key import rsa <name> [fpkey <file-path>|ftp:|http:|
https:|scp:|tftp:]
D
ESCRIPTION
This command imports an RSA key pair from a remote location.
Note: Currently, SCP option is not supported.
P
ARAMETERS
name
fpkey <file-path>
E
XAMPLE
ALU(config)#crypto key import rsa testKey ftp:

CRYPTO MAP

crypto map <name> ipsec-ike <ike-policy name>} [force]
D
ESCRIPTION
Enter this command in the Configuration mode. This command creates a crypto
map, and attaches an IKE policy to it.
•
Which traffic should be protected by IPsec. (as defined by match-list earlier).
•
Where the IPsec-protected traffic should be sent (remote ipsec peer).
•
What kind of IPsec security to be applied to this traffic (as configured by the
transform-set).
•
Security associations are established via IKE.
•
The crypto map name can have a maximum of 32 characters.
664
Beta
Parameter
Alcatel-Lucent
Description
Name of the RSA key pair.
FPkey file path. To copy the certificate
into the front panel USB memory.
OmniAccess 700 CLI Command Reference Guide
Beta