Terminal Monitor; Traceroute - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

TERMINAL MONITOR

terminal monitor <0-7>
D
ESCRIPTION
This command displays log messages of the given priority and higher on a
terminal that has been launched through SSH or Telnet.
P
ARAMETERS
0-7
E
XAMPLE
ALU(config)# terminal monitor

TRACEROUTE

traceroute [vrf <vrf-name>] {<ip-address>|<hostname>}
D
ESCRIPTION
This command displays the route taken by IP packets.
P
ARAMETERS
vrf-name
ip-address
hostname
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU> traceroute 10.91.10.178
traceroute to
1 10.91.0.1 (10.91.0.1) 0.700 ms
2 10.91.10.178 (10.91.10.178) 0.951 ms
R H
ELEASE ISTORY
Release 2.3: parameter vrf <vrf-name> was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
(10.91.10.178), 30 hops max, 38 byte packets.
Alcatel-Lucent
Description
Priority level of the messages.
Description
If the VRF name is specified, the packets
will be routed using the routing table of
the specified VRF on a interface
associated with the VRF.
IP address of the host.
Name of the host.
0.703 ms 0.621 ms
0.961 ms
Beta
terminal monitor
0.960 ms
133