Telephony-User-Dialplan Rule - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
TELEPHONY USER
telephony-user-dialplan rule <1-3> pattern <destination-number-
pattern> user <pstn-gateway-extension-number> [<gateway-ip-
address>]
D
ESCRIPTION
Enter this command in the Telephony Service Mode. This command is used to
configure dial plan rules for outgoing numbers. You can configure three different
dial plan rules.
P
ARAMETERS
Parameter
destination-
number-pattern
pstn-gateway-
extension-number
gateway-ip-address Gateway IP address.
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
OmniAccess 700 CLI Command Reference Guide
Beta
-
DIALPLAN RULE
Destination number pattern.
Note:
PSTN gateway extension number. This can be a
maximum of 8 characters.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

telephony-user-dialplan rule

Description
Destination number pattern is based on the
PCRE standard.
The number pattern can be a maximum of 64
characters.
If the user extension (PSTN gateway
extension number) is specified as Zero, the
dialled destination number will be taken as
the user.
773
Beta