Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual page 529

Left running head:
Chapter name (automatic)
Open Shortest Path First
E 2
XAMPLE
ALU# show ip ospf interface GigabitEthernet 7/0
GigabitEthernet7/0 is up, line protocol is up
Internet Address 1.1.1.2/24, Area 0
Process ID 1, Router ID 1.1.1.2, Network Type BROADCAST, Cost: 100
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 1.1.1.2, Intf address 1.1.1.2
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:04
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Message digest authentication enabled
ALU
#
E 3
XAMPLE
ALU# show ip ospf interface statistics
GigabitEthernet7/0
Internet Address 1.1.1.2/24, ProcessID 1, Area 0
Hello Packets Received 516, Hello Packets Sent 508
Database Description Packets Received 11, Database
Description Packets Sent 9
LS Request Packets Received 1, LS Request Packets Sent 2
LS Update Packets Received 22, LS Update Packets Sent 11
LS Acknowledgment Packets Received 7, LS Acknowledgment
Packets Sent 15
Errors 0, Events 0
GigabitEthernet7/1
Internet Address 2.2.2.2/24, ProcessID 1, Area 1
Hello Packets Received 506, Hello Packets Sent 507
Database Description Packets Received 6, Database Description
Packets Sent 7
LS Request Packets Received 0, LS Request Packets Sent 2
LS Update Packets Received 14, LS Update Packets Sent 38
LS Acknowledgment Packets Received 19, LS Acknowledgment
Packets Sent 8
Errors 1, Events 0
ALU#
GigabitEthernet
Internet Address
Process ID
Router ID
Network Type
496
Beta
Parameter
Alcatel-Lucent
Description
Status of physical link and operational
status of the protocol.
Interface IP address, subnet mask, and
area address.
OSPF Process ID.
OSPF Router ID.
The interface network type.
OmniAccess 700 CLI Command Reference Guide
Beta