Show Ip Route - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW IP ROUTE

show ip route [{network-number|ip-address/prefix length}
[longer-prefixes]|ospf [<1-65535>]|connected|bgp
|rip|summary|supernets-only]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays the current state of a routing protocol. You can filter show IP
route output to view specific protocol routes.
P
ARAMETERS
Field
{network-
number|ip-
address/prefix
length}
longer-prefixes
ospf [<1-65535>]
|connected|bgp|
rip|summary|super
nets-only]
E
XAMPLE
E 1
XAMPLE
ALU# show ip route
Codes: R - RIP, O - OSPF, C - connected
S - static, M - mcstatic, B - BGP
IA - OSPF inter area route, E1 - OSPF external type 1 route,
E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route,
N2 - OSPF NSSA external type 2 route
* - candidate default route
Gateway of last resort is not set
5.0.0.0/24 is subnetted, 3 subnets
C 5.5.0.0 [0/0] is directly connected, Serial0/0:0
C 5.5.1.0 [0/0] is directly connected, Serial0/0:1
C 5.5.2.0 [0/0] is directly connected, Serial0/0:2
6.0.0.0 is variably subnetted, 2 subnets, 2 masks
S 6.6.6.0/24 [1/0] is directly connected, Serial0/0:2
O 6.6.6.6/32 [110/10][1] via 5.5.0.1, Serial0/0:0
S 7.0.0.0/8 [1/0] is directly connected, Serial0/0:0
10.0.0.0/24 is subnetted, 1 subnet
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Displays the routing information for the given network
number or IP address and prefix length.
Specifies that only routes matching the IP address and
mask pair should be displayed.
Displays the output for a specific routing protocols.
via 5.5.1.1, Serial0/0:1
via 5.5.2.1, Serial0/0:2
is directly connected, Serial0/0:1
Alcatel-Lucent
Description
Beta
show ip route
373