-
IP PIM SPARSE
MODE
ip pim sparse-mode
D
ESCRIPTION
Enter this command in the Interface Configuration mode.
This command is used to enable IGMP on an interface. After enabling this
command, IGMP learns the multicast host information on given interface.
P
ARAMETERS
None.
D
V
EFAULT
ALUE
By default IGMP is not enabled on an interface.
E
XAMPLE
ALU(config-if GigabitEthernet3/0)# ip pim sparse-mode
NO IP PIM SPARSE
no ip pim sparse-mode
This command is used to disable IGMP on an interface.
OmniAccess 700 CLI Command Reference Guide
Beta
-
MODE
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
ip pim sparse-mode
529
Beta