Show Interfaces - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Release versions: 2.2; 2.2-r02; 2.3
Table of Contents

Advertisement

SHOW INTERFACES

show interfaces [<interface-name>]
D
ESCRIPTION
This command is entered in the Super User mode, Configuration mode, or
Interface Configuration mode.
This command displays traffic and all the corresponding details of all the
interfaces configured. If interface name is specified, corresponding details for a
specified interface is displayed.
P
ARAMETERS
.
interface name
E
1
XAMPLE
ALU# show interfaces
loopback1 is up, line protocol is up
Internet address is 55.0.0.35/24
MTU 1500 bytes, BW 0 Kbit, DLY 0 usec,
reliability 0/255, txload 0/255, rxload 0/255
Encapsulation LOOPBACK, loopback not set
Keepalive not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/0/0/0 (size/max/drops/flushes);
Total output drops: (null)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
loopback is up, line protocol is up
Internet address is 11.11.11.11/24
MTU 1500 bytes, BW 0 Kbit, DLY 0 usec, reliability 0/255,
txload 0/255, rxload 0/255
Encapsulation LOOPBACK, loopback not set
Keepalive not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/0/0/0 (size/max/drops/flushes); Total
output drops: (null)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Name of the interface.
Beta
show interfaces
157

Advertisement

Table of Contents
loading

Table of Contents