Show Ip Dhcp Bindings - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server

SHOW IP DHCP BINDINGS

show ip dhcp bindings [{dynamic|manual|pool <name>}] [vrf <vrf-
name>]
D
ESCRIPTION
This command shows all the assigned leases (the IP addresses allocated to the
hosts.)
P
ARAMETERS
dynamic
manual
pool <name>
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU
(config)# show ip dhcp bindings
IP Address Hardware Address
========== ================
10.91.2.87
203.196.196.74
ALU
(config)# show ip dhcp bindings dynamic
IP Address Hardware Address
========== =================
10.91.2.87 00:0f:fe:3a:63:da
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
838
Beta
Parameter
Lease Expiration
================
00:0f:fe:3a:63:da Wed Jan 17 23:38:11 2007
00:0f:ef:3b:63:de INFINITE
Lease Expiration
========================
Wed Jan 17 23:38:11 2007
Alcatel-Lucent
Description
Shows all the dynamically assigned
leases of all the pools.
Shows all the manually linked leases.
Shows all the assigned leases for a
specific pool (dynamic/manual).
If the VRF name is specified, it displays
the bindings for the specified VRF. If the
VRF is not specified, the bindings are
displayed for the Default VRF.
DYNAMIC
MANUAL
Type
=======
DYNAMIC
OmniAccess 700 CLI Command Reference Guide
Beta
Type Pool
===== ====
p1
p2
Pool
=====
p1