Neighbor Distribute-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NEIGHBOR DISTRIBUTE
neighbor {<ip-address>|<peer-group-name>} distribute-list {<1-
199>|<1300-2699>|<access-list-name>}{in|out}
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command distributes BGP neighbor information as specified in an access list.
P
ARAMETERS
Parameter
ip-address
peer-group-name
1-199
100-199
access-list-name Name of a IP access list.
in
out
D
EFAULT
No BGP neighbor is specified.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 distribute-list 1
in
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
LIST
Neighbor's IP address.
Name of a BGP peer group.
Standard IP access list number or name. The list defines
which networks are to be received and which are to be
suppressed in routing updates.
Extended IP access list number or name.
Access list is applied to incoming advertisements from that
neighbor.
Access list is applied to outgoing advertisements to that
neighbor.
Alcatel-Lucent

neighbor distribute-list

Description
Beta
423