Neighbor Soft-Reconfiguration Inbound; Neighbor Timers - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NEIGHBOR SOFT
neighbor {<ip-address>|<peer-group-name>} soft-reconfiguration
inbound
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command configures the software to start storing the updates from the neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
inbound
D
EFAULT
By default, soft re-configuration is disabled.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 soft-
reconfiguration inbound

NEIGHBOR TIMERS

neighbor {<ip-address>|<peer-group-name>} timers {<0-65535> <0-
65535>}
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command sets the timers for a specific BGP peer or peer group.
P
ARAMETERS
Parameter
ip-address
peer-group-name
0-65535
0-65535
OmniAccess 700 CLI Command Reference Guide
Beta
-
RECONFIGURATION INBOUND
IP address of the BGP-speaking neighbor.
Name of a BGP peer group.
Store incoming updates.
A BGP peer or peer group IP address.
Name of the BGP peer group.
Keepalive message interval for the neighbor.
Hioldtime interval for the neighbor.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

neighbor soft-reconfiguration inbound

Description
Description
433
Beta