Ip Dhcp Pool - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server

IP DHCP POOL

ip dhcp pool <pool-name> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure a DHCP pool. This enters the DHCP pool sub-configuration mode.
P
ARAMETERS
pool-name
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip dhcp pool p1 vrf alu-vrf
ALU(config-dhcp-pool-p1)#
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
832
Beta
Parameter
Alcatel-Lucent
Description
Name of the pool. The pool name should
be unique across the system.
If the VRF name is specified, it
configures the DHCP pool in the
specified VRF. If the VRF is not
specified, the pool is configured for the
Default VRF.
OmniAccess 700 CLI Command Reference Guide
Beta