Neighbor Remove-Private-As; Neighbor Route-Map - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
NEIGHBOR REMOVE
neighbor {<ip-address>|<peer-group-name>} remove-private-as
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command removes the private AS numbers from the updates sent to the
neighbors. Private AS values are from 64512 to 65535.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
None.
E
XAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 remove-private-as
NEIGHBOR ROUTE
neighbor {<ip-address>|<peer-group-name>} route-map <name>
{in|out}
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command applies a route map to incoming or outgoing routes.
P
ARAMETERS
Parameter
ip-address
peer-group-name
name
in
out
D V
EFAULT ALUE
No route maps are applied to a peer.
430
Beta
- -
PRIVATE AS
Neighbor's IP address.
Name of a BGP peer group.
-
MAP
Neighbor's IP address.
Name of a BGP peer group.
Name of route map.
Apply to incoming routes.
Apply to outgoing routes.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta