Renumber; Show Ip Filter - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Filter and Firewall

RENUMBER

renumber
D
ESCRIPTION
Enter this command in the Filter Configuration mode. Use this command to
generate a numbering scheme for the filter rules configured.
P
ARAMETERS
None.
E
XAMPLE
ALU(config-filter-f1)# renumber

SHOW IP FILTER

show ip filter [<name>]
D
ESCRIPTION
This command displays the details of all the filters configured on the system. If
filter name is specified, it displays the details for the specified filter.
P
ARAMETERS
name
E
XAMPLE
Enter this command in the Super User mode. The following syntax displays the all
the filters configured in the system:
ALU# show ip filter
ip filter f1
10 match any m1 permit
20 match any m1 permit
default deny
interface GigabitEthernet7/0 In, Stats Off
ip filter f2
10 match any m2 deny
default deny
interface GigabitEthernet7/0 In, Stats Off
596
Beta
Parameter
Alcatel-Lucent
Description
Name of the filter.
OmniAccess 700 CLI Command Reference Guide
Beta