No Dot1X Host-Mode; No Dot1X Max-Request; No Dot1X Port-Control; No Dot1X Reauthentication - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
802.1X Port-Based Authentication
1
NO DOT X HOST

no dot1x host-mode

This command disables multiple hosts/multiple authentication mode on the port,
and resets to 'single host mode', which is the default.
1 -
NO DOT X MAX
no dot1x max-request [<1-10>]
This command sets the max-request to its default, which is 2.
1
NO DOT X PORT
no dot1x port-control [auto|forced-authorized|forced-
unauthorized]
This command is used to disable 802.1X port-based authentication on the L2
interface, and resets to its default.
1
NO DOT X REAUTHENTICATION

no dot1x reauthentication

This command is used to disable periodic reauthentication of the client.
1
NO DOT X SYSTEM

no dot1x system-auth-control

This command is used to disable 802.1X port-based authentication globally.
1
NO DOT X TIMEOUT QUIET
no dot1x timeout quiet-period [<1-3600>]
This command sets the quiet period to its default, 60 seconds
1
NO DOT X TIMEOUT REAUTH
no dot1x timeout reauth-period [<1-65535>]
This command sets the reauthentication period to its default, 3600 seconds.
1
NO DOT X TIMEOUT SUPP
no dot1x timeout supp-timeout [<1-65535>]
This command sets the supp-timeout to its default, 30 seconds.
1
NO DOT X TIMEOUT TX
no dot1x timeout tx-period [<1-3600>]
This command sets the tx-period to its default, 30 seconds.
196
Beta
-
MODE
REQUEST
-
CONTROL
- -
AUTH CONTROL
-
PERIOD
-
PERIOD
-
TIMEOUT
-
PERIOD
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta