Network-Control; No Auto Qos Diff-Serv; No Auto Qos Template; No Auto Qos Voip - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Quality of Service
-
NETWORK CONTROL

network-control

D
ESCRIPTION
This command is used in the Class mode. Configures the traffic class a network
control class.
P
ARAMETERS
network-control
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-qos-P1-C1)# network-control
NO AUTO QOS DIFF

no auto qos diff-serv

This command disables Auto QoS Diff-Serv on an interface.

NO AUTO QOS TEMPLATE

no auto qos template {diff-serv|voip} <policy-map name>
This command removes the specified Auto QoS template.

NO AUTO QOS VOIP

no auto qos voip
This command disables Auto QoS VoIP on an interface.

NO BANDWIDTH

no bandwidth
This command removes the bandwidth configuration.

NO CLASS

no class <class-map name>
This command removes a traffic-class associated with the policy-map.
784
Beta
Parameter
-
SERV
Alcatel-Lucent
Description
The highest priority among all the traffic
classes.
OmniAccess 700 CLI Command Reference Guide
Beta