Duplex; Flowcontrol - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

DUPLEX

duplex {auto|full|half}
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
configures duplex operation on an interface.
P
ARAMETERS
None.
D V
EFAULT ALUE
The default Duplex mode is "auto".
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# duplex full

FLOWCONTROL

flowcontrol {receive|send} {off|on}
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
configures flowcontrol on a GigE interface.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, the flowcontrol is set to "Off".
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# flowcontrol receive on
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
duplex
153
Beta