Vrrp Group-Id Authentication Text - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Router Redundancy Protocol
Priority is 100
Master Router is 10.1.1.1 (local), priority is 100
Master Advertisement interval is 1.000 secs
Master Down interval is 3.000 secs
-
VRRP GROUP ID AUTHENTICATION TEXT
vrrp <1-8> authentication text <password>
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command is
used to set authentication for the VRRP group. The authentication string can have
a maximum of 8 characters.
Note: The OA-700 supports null authentication and plain-text authentication.
P
ARAMETERS
1-8
password
D V
EFAULT ALUE
By default, no authentication is set on the VRRP group.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# vrrp 7 authentication text
net123
142
Beta
Parameter
Alcatel-Lucent
Description
Specifies the group number. It is in the range
1 - 8.
Denotes the authentication password used. A
maximum of 8 characters are allowed.
OmniAccess 700 CLI Command Reference Guide
Beta