Ip Route - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Protocol Independent Features

IP ROUTE

ip route {destination network subnet-mask|destination network/
prefix-length} {<gateway-ip-address>|<interface-name>
[<gateway-ip-address>]}[<1-255>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure a static route.
P
ARAMETERS
Parameter
{destination
network subnet-
mask|destination
network/prefix-
length}
gateway-ip-
address
interface name
1-255
D V
EFAULT ALUE
By default, no static route is configured.
E
XAMPLE
ALU(config)# ip route 1.1.1.1/24 2.2.2.2
350
Beta
The IP address and prefix length of the destination.
IP address of the next hop.
Name of the next hop interface.
An administrative distance of the route.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta