Change - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Filter and Firewall

CHANGE

change {<1-65535> <1-65535>}
D
ESCRIPTION
This command is used in the Firewall Configuration mode. Use this command to
change the priority of a specific configured firewall policy rule.
P
ARAMETERS
1-65535
E
XAMPLE
Consider the following configuration:
ALU(config)# firewall
ALU(config-firewall)# policy P1
ALU(config-firewall-P1)#
10
20
30
40
In the above sequence, if m4 has a priority 40. Use the "change " keyword to
change the priority of m4.
ALU(config-firewall)# policy P1
ALU(config-firewall-P1)# change 40 15
600
Beta
Parameter
match m1 permit
match m2 deny log
match m3 permit
match m4 deny reset
Alcatel-Lucent
Description
Denotes the firewall policy rule number.
This rule number signifies the priority of
a rule.
OmniAccess 700 CLI Command Reference Guide
Beta