Crypto Ike Policy; Crypto Nat-Traversal - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
IP Security - Virtual Private Network
D V
EFAULT ALUE
There is no default pre-shared authentication key.
E
XAMPLE
ALU(config)#crypto ike key top_secret1612 peer 10.10.1.2
ALU(config)#crypto ike key "!netsecret!" peer 202.54.30.100

CRYPTO IKE POLICY

crypto ike policy <name> [force]
D
ESCRIPTION
This command configures an IKE policy.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# crypto ike policy P1
ALU(config-crypto-ike-policy-P1)#
-
CRYPTO NAT TRAVERSAL
crypto nat-traversal {enable|disable}
D
ESCRIPTION
This command is used to enable or disable NAT traversal for IPsec on the
OA-700.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, NAT Traversal is enabled.
E
XAMPLE
ALU(config)# crypto nat-traversal disable
660
Beta
Parameter
Alcatel-Lucent
Description
IKE policy name.
OmniAccess 700 CLI Command Reference Guide
Beta