MODE
mode {gre|ipsec}
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to set the mode on tunnel interface.
P
ARAMETERS
gre
ipsec
D
V
EFAULT
ALUE
By default, tunnel is configured in GRE mode.
E
XAMPLE
ALU(config-if Tunnel1)# mode ipsec
-
NO IKE
IDENTITY
no ike-identity
The 'no' command detaches the specified IKE identity attached to a profile.
-
NO IKE
POLICY
no ike-policy
The 'no' command detaches the specified IKE policy attached to the profile. An
IKE policy must be first detached from the profile to delete it globally.
-
NO IPSEC
PROFILE
no ipsec-profile <profile-name>
This command is used to detach the IPsec profile attached to the interface. You
cannot delete an IPsec profile that is applied to the interface. To delete, first
detach the IPsec profile from the tunnel interface.
NO LIFETIME
no lifetime {kilobytes|seconds}
The 'no' command resets the seconds lifetime to default. If set in kilobytes, the
'no' command removes the kilobytes lifetime value.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Use this keyword to configure the tunnel
in GRE mode.
Use this keyword to configure the tunnel
in IPsec mode.
Beta
mode
701