Set As-Path - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Protocol Independent Features
-
SET AS PATH
set as-path {tag|prepend [<1-65535>]}
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This command
modifies the BGP autonomous system path.
P
ARAMETERS
Parameter
tag
prepend [<1-
65535>]
D V
EFAULT ALUE
Autonomous system path is not specified.
E
XAMPLE
ALU(config-route-map)# set as-path tag
362
Beta
Converts the tag of a route into an autonomous system
path. This is applicable only when routes are redistributed
into BGP.
Appends the string following the keyword prepend to the
autonomous system path of the route that is matched by the
route-map. Applies to inbound and outbound BGP route
maps.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta