Vrrp Group-Id Track-Interface - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
VRRP GROUP ID TRACK
vrrp <1-8> track-interface <interface-name>
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command
configures the interface to be tracked that can alter the priority level of a virtual
router in a VRRP group. The priority of the group is lowered when the tracked
interface state changes to down.
P
ARAMETERS
1-8
interface-name
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# vrrp group track-interface
serial1/0:0
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
INTERFACE
Parameter
Alcatel-Lucent

vrrp group-id track-interface

Description
Specifies the group number. It is in the
range 1 - 8.
Interface name.
Beta
147