Neighbor Peer-Group (Creating); Neighbor Prefix-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
NEIGHBOR PEER
neighbor <peer-group-name> peer-group
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command is used to create BGP peer group.
P
ARAMETERS
Parameter
peer-group-name
D
EFAULT
By default, there is no BGP peer group.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor testpeergroup peer-group
NEIGHBOR PREFIX
neighbor {<ip-address>|<peer-group-name>} prefix-list <name>
{in|out}
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command filters the updates to and from the BGP neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
name
in
out
428
Beta
- (
GROUP CREATING
Name of the BGP peer group.
-
LIST
Neighbor's IP address.
Name of the BGP peer group.
Name of a prefix list.
Access list is applied to incoming advertisements from that
neighbor.
Access list is applied to outgoing advertisements to that
neighbor.
Alcatel-Lucent
)
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta