Default-Metric; Distance - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
DEFAULT METRIC
default-metric <1-4294967295>
D
ESCRIPTION
Enter the default-metric command in Router Configuration mode. This command
sets default metric values for the OSPF routing protocol.
P
ARAMETERS
Parameter
<1-4294967295>
D V
EFAULT ALUE
Default metric is 20.
E
XAMPLE
ALU(config-router ospf 30)#default-metric 60000

DISTANCE

distance {<1-255> [<ip-address subnet-mask|<ip-address/prefix-
length>][<1-99>] [<1300-1999>]}
D
ESCRIPTION
This command is used in the Router Configuration mode. This command is used
to change the administrative distance for a given network.
P
ARAMETERS
Parameter
1-255
<ip-address
subnet-mask|<ip-
address/prefix-
length>
1-99
1300-1999
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Default metric value appropriate for the specified routing
protocol.
Administrative distance.
IP address with subnet mask or prefix length.
IP standard access list.
IP standard access list (expanded range).
Alcatel-Lucent
Description
Description
Beta

default-metric

465