Pfs; Show Crypto Ipsec Profile - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

PFS

pfs {group1|group2|group5}
D
ESCRIPTION
This command is entered in the IPsec Profile Configuration mode. This command
is used to attach a PFS group to an IPsec profile.
P
ARAMETERS
group1|group2|group5
D V
EFAULT ALUE
If no PFS group is attached to an IPsec profile, group2 PFS is used.
E
XAMPLE
ALU(ipsec-profile-PF1)# pfs group2

SHOW CRYPTO IPSEC PROFILE

show crypto ipsec profile [<profile-name>]
D
ESCRIPTION
This command displays the IPsec profile details.
P
ARAMETERS
profile-name
E
XAMPLE
ALU(config)# show crypto ipsec profile
crypto ipsec profile PF1
ike-policy secret
transform-set transet1
ike-identity ID01
pfs group2
! lifetime seconds 28800
! Applied to:
interface Tunnel1
ipsec-profile PF1
ALU(config)#
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Name of the PFS group.
Description
Displays the configuration details for the
specified IPsec profile.
Beta
pfs
703