Ip Name-Server; No Ip Domain-List; No Ip Domain-Lookup - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
IP NAME SERVER
ip name-server <ip-address...> [{prefer|primary|secondary
|tertiary}]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to add
DNS server to which the resolution requests are sent.
You can add maximum of three DNS servers, and specify the order of preference
to them individually - Primary, Secondary, Tertiary.
Primary is tried first, then the Secondary, and lastly Tertiary. Secondary and
tertiary name servers are tried only when the query sent to the primary server is
not successful. "Prefer" is the same as "primary".
P
ARAMETERS
ip-address
prefer
primary
secondary
tertiary
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# ip name-server 1.1.1.1 1.1.1.2 1.1.1.3
ALU(config)# ip name-server 1.1.1.1 primary
-
NO IP DOMAIN LIST
no ip domain-list <name>
This command is used to delete an entire domain list or a specific domain name
from the domain list.
-
NO IP DOMAIN LOOKUP

no ip domain-lookup

This command is used to disable the domain lookup.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
IP address of the DNS server.
Set the DNS server as the preferred server.
Set the DNS server as the primary server.
Set the DNS server as the secondary
server.
Set the DNS server as the tertiary server.

ip name-server

855
Beta