Rule Disable; Rule Enable - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Intrusion Detection System

RULE DISABLE

rule disable {{category <name>...|classtype <name>...| priority
{high|low|medium}|sid <1-4294967295...>}
D
ESCRIPTION
This command is used in Intrusion Snort Configuration mode. Use this command
to disable Snort rules by Snort rule ID (SID), class type, priority, or category.
P
ARAMETER
category <name>
class-type <name>
priority {high|low|medium}
sid <1-4294967295...>
E
XAMPLE
ALU(config-firewall-intrusion-snort)#rule disable classtype
attempted-dos

RULE ENABLE

rule enable {{category <name>...|classtype <name>...| priority
{high|low|medium}|sid <1-4294967295...>}
D
ESCRIPTION
This command is used in Intrusion Snort Configuration mode. Use this command
to enable Snort rules by Snort Rule ID (SID), class type, priority, or category.
P
ARAMETER
category <name>
class-type <name>
priority {high|low|medium}
sid <1-4294967295...>
E
XAMPLE
ALU(config-firewall-intrusion-snort)# rule enable classtype
attempted-dos
716
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Name of the Snort rule category.
Name of the Snort rule class type.
Snort rule priority: low, high or medium.
Snort rule ID.
Description
Name of the Snort rule category.
Name of the Snort rule class type.
Snort rule priority: low, high or medium.
Snort rule ID.
OmniAccess 700 CLI Command Reference Guide
Beta