Arp - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Routing and Forwarding

ARP

arp [vrf <vrf-name>] <ip-address> <hardware-address>
D
ESCRIPTION
This command adds a static ARP entry. If the VRF name is specified, then the
ARP entry is added to the specified VRF, else it is added to the defualt VRF.
P
ARAMETERS
vrf-name
ip-address
hardware-address
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# arp vrf ALU-vrf 10.91.0.21 0004.9BE9.C4A8
R H
ELEASE ISTORY
Release 2.3: command was introduced.
544
Beta
Parameter
Alcatel-Lucent
Description
The name of the VRF to which ARP entry is
to be added.
IP address of the host for which user wants
to add MAC entry.
The MAC address of the specified host.
OmniAccess 700 CLI Command Reference Guide
Beta