SHOW FIREWALL SESSION PROTO
show firewall session [proto (tcp|udp|icmp)]
D
ESCRIPTION
This command is entered in the Super User mode. This command displays the
firewall sessions with respect to the protocol type.
P
ARAMETERS
proto
tcp
udp
icmp
E
XAMPLE
The following syntax is used to view the details of firewall session with respect to
TCP protocol:
ALU(config)# show firewall session proto icmp
ID
70 ICMP timeout 19 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
show firewall session proto
Description
Protocol type.
Shows the session details for TCP
protocol only.
Shows the session details for UDP
protocol only.
Shows the session details for ICMP
protocol only.
Beta
623