Match Route-Type; No Passive-Interface - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
MATCH ROUTE TYPE
match route-type {external [{type-1|type-2}]|internal|local
|nssa-external}
D
ESCRIPTION
Enter this command in Route-Map Configuration mode. This command matches
the specified route type.
P
ARAMETERS
Parameter
{external
[{type-1|type-
2}]
internal
local
nssa-external
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-route-map)# match route-type external type-2
-
NO PASSIVE INTERFACE
no passive-interface <interface-name>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command activates
only those interfaces that need to have adjacencies set.
P
ARAMETERS
Parameter
interface-name
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-router ospf1)# no passive-interface GigabitEthernet
7/0
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
OSPF external routes. The external type-1 keyword
matches only Type 1 external routes and the external type-2
keyword matches only Type 2 external routes.
OSPF intra-area and inter-area routes internal routes.
Locally generated BGP routes.
NSSA external route (OSPF Type 1 or 2).
Name of the interface.
Alcatel-Lucent

match route-type

Description
Description
Beta
357