Neighbor Route-Reflector-Client - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

E
XAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 route-map R1 in
NEIGHBOR ROUTE
neighbor {<ip-address>|<peer-group-name>} route-reflector-
client
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command configures the neighbor as a BGP route reflector client.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
There is no route reflector in the AS.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.1 route-reflector-
client
OmniAccess 700 CLI Command Reference Guide
Beta
- -
REFLECTOR CLIENT
IP address of the BGP neighbor being identified as a client.
Name of a BGP peer group.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

neighbor route-reflector-client

Description
431
Beta