Encapsulation Frame-Relay; Frame Relay Interface-Dlci - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Frame Relay
ENCAPSULATION FRAME

encapsulation frame-relay

D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to set encapsulation on an interface to Frame Relay.
P
ARAMETERS
None.
D V
EFAULT ALUE
HDLC is the default encapsulation on an interface.
E
XAMPLE
ALU(config-if serial 0/0:0)# encapsulation frame-relay
FRAME RELAY INTERFACE
frame-relay interface-dlci <16-1007>
D
ESCRIPTION
This command is used to configure a DLCI on an interface/sub-interface.
P
ARAMETERS
16-1007
D V
EFAULT ALUE
None.
E
XAMPLE
The following example sets the DLCI value to 100:
ALU(config-if Serial 0/0:0)# frame-relay interface-dlci 100
250
Beta
-
RELAY
-
DLCI
Parameter
Alcatel-Lucent
Description
The DLCI value.
OmniAccess 700 CLI Command Reference Guide
Beta