Tunnel Vrf - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Generic Routing Encapsulation

TUNNEL VRF

tunnel vrf {<vrf-name>|default}
D
ESCRIPTION
This command is entered in the Interface Configuration Mode. This command
allows to resolve the tunnel source and tunnel destination from the specified VRF
instead of the VRF associated with the tunnel interface.
P
ARAMETERS
vrf-name
default
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config-if Tunnel7)# tunnel vrf ALU-vrf1
R H
ELEASE ISTORY
Release 2.3: command was introduced.
732
Beta
Parameter
Alcatel-Lucent
Description
Name of the VRF different from the VRF
associated with the tunnel interface.
Default VRF.
OmniAccess 700 CLI Command Reference Guide
Beta