Show Firewall Session Destination - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Filter and Firewall

SHOW FIREWALL SESSION DESTINATION

show firewall session [destination {<ip-address>|<ip-address/
prefix-length>} [{<1-65535>|proto {gre|icmp|tcp|udp}]
D
ESCRIPTION
This command is entered in the Super User mode. This command is used to view
the firewall session details given the source address.
P
ARAMETERS
ip-address
ip-address/prefix-length
1-65535
gre|icmp|tcp|udp
E
XAMPLE
ALU(config-if GigabitEthernet7/1)# show firewall session
destination ip 10.91.0.1
ID 70 ICMP timeout 25 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
624
Beta
Parameter
Alcatel-Lucent
Description
Destination IP address.
Destination IP address with prefix length.
Denotes the port number.
Protocol type.
OmniAccess 700 CLI Command Reference Guide
Beta