Table of Contents
Advertisement
-
NO CHANNEL
GROUP
no channel-group <0-23>
This command removes the channel-groups configured on the controller.
NO ENCAPSULATION
no encapsulation
This command restores the encapsulation to its default.
NO FRAMING
no framing
This command resets the framing value to its default.
NO LINECODE
no linecode
This command sets the line coding to its default value.For b8zs the default line
coding value is b8zs. For hdb3 the default line code value is HDB3.
NO LOOPBACK
no loopback
The command disables the loopback mode set on the interface. The default
loopback for T1 lines is Local.
NO MTU
no mtu
This command sets the MTU to its default.
NO SHUTDOWN
no shutdown
This command when entered in the Controller Configuration mode brings up the
controller.
This command when entered in the Interface Configuration mode brings up the
interface.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
no channel-group
231
Beta
Advertisement
Table of Contents
