Router Rip; Show Ip Protocols - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Router Information Protocol

ROUTER RIP

router rip
D
ESCRIPTION
This command is used in the Configuration mode. This command enables the RIP
routing process.
P
ARAMETERS
None.
E
XAMPLE
ALU(config)# router rip
ALU(config-router rip)#

SHOW IP PROTOCOLS

show ip protocols [summary]
D
ESCRIPTION
Enter this command in the Super User mode. This command displays a detailed
routing configuration.
P
ARAMETERS
Parameter
summary
E
XAMPLE
The show ip protocols command in SUM can be used to verify summarization
configuration as shown in the example below.
ALU# show ip protocols
Routing Protocol is
Sending updates every 30 seconds, next due in 27 seconds
Invalid after 180 seconds, hold down 180, flushed after 240 seconds
Default redistribution metric is 3
Redistributing External Routes from:
connected metric 3
static metric 4
Default version control: send version 2, receive version 2
Automatic network summarization is in effect
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Interface
GigabitEthernet7/1
392
Beta
Summary key word can be used to have a summary of the
routing configuration.
"rip"
Send Recv
2 2
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Key-chain
Beta