Telephony-Debug-Level - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Telephony Services
When all call servers are down, OA-700 switches to survivability mode:
ALU(config)# show telephony status
Call Server : 100.0.0.10
Call Server : 100.0.0.11
Call Server : 100.0.0.12
Survivability Mode : Enable
When no call servers are configured, OA-700 is in stand-alone mode.
ALU(telephony-service)# show telephony status
stand-alone Mode : enable
R H
ELEASE ISTORY
Release 2.3: command was introduced.
-
TELEPHONY DEBUG
telephony-debug-level <0-7>
D
ESCRIPTION
This command enables debugging of Telephony Service features.
P
ARAMETERS
0-7
D V
EFAULT ALUE
The default debug level is 0.
E
XAMPLE
ALU(config)# telephony-debug-level 7
R H
ELEASE ISTORY
Release 2.3: command was introduced.
766
Beta
-
LEVEL
Parameter
Alcatel-Lucent
Priority : 1 Status : False
Priority : 2 Status : False
Priority : 3 Status : False
Status : Active
Status : Active
Description
Signifies debug level.
0 disables debugging. 1-7 specifies the
depth of the debugging information to be
viewed. Higher the number, detailed
debugging information is displayed.
OmniAccess 700 CLI Command Reference Guide
Beta