Line Vty Exec-Timeout; List Config-Files - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
System Configuration and Monitoring
-
LINE VTY EXEC TIMEOUT

line vty exec-timeout

D
ESCRIPTION
This command is used to configure the time-out (in minutes or seconds) for SSH,
Telnet and Modem CLI sessions. These sessions close if it is idle for the specified
time.
A zero input specifies that the SSH, Telnet and Modem CLI sessions should never
exit when left idle.
P
ARAMETERS
0-35791
0-60
D V
EFAULT ALUE
The default time-out is 20 minutes.
E
XAMPLE
ALU(config)# line vty exec-timeout 0
ALU(config)# line vty exec-timeout 45 15
-
LIST CONFIG FILES

list config-files

D
ESCRIPTION
This command is used to load a configuration file to the running configuration.
This effectively leads to the execution of all the commands in the given file.
This file should be present in the alu-config directory. (Use the copy commands to
copy the file to the alu-config directory.)
P
ARAMETERS
None.
E
XAMPLE
ALU# list config-files
Permission
---------
-rw-
-rw-
60
Beta
<0-35791> [<0-60>]
Parameter
Size Date modified
---- -------------
10464 Dec 26 15:25
10461 Dec 25 08:13
Alcatel-Lucent
Description
Time-out in minutes.
Time-out in seconds.
Name
------
my-config
startup-config
OmniAccess 700 CLI Command Reference Guide
Beta