Dot1X Re-Authenticate Interface Switchport; Dot1X System-Auth-Control - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

1 -
DOT X RE AUTHENTICATE INTERFACE SWITCHPORT
dot1x re-authenticate interface switchport <slot/port>
D
ESCRIPTION
This command is entered in the Configuration mode. This command is used to
manually reauthenticate the clients connected to a port.
P
ARAMETERS
slot/port
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# dot1x re-authenticate interface switchport 5/0
1 -
DOT X SYSTEM

dot1x system-auth-control

D
ESCRIPTION
This command is entered in the Configuration mode.This command is used to
enable 802.1X port-based authentication globally.
P
ARAMETERS
None.
D V
EFAULT ALUE
When enabled, the port-based authentication on the interface will be 'forced-
authorized'.
E
XAMPLE
ALU(config)# dot1x system-auth-control
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
-
AUTH CONTROL
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

dot1x re-authenticate interface switchport

Description
Interface slot and port number.
193
Beta