Telnet - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

TELNET

telnet [vrf <vrf-name>] {<ip-address>|<hostname>}
D
ESCRIPTION
This command starts a telnet connection to a remote computer.
P
ARAMETERS
vrf-name
ip address
hostname
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU> telnet 10.91.0.1
R H
ELEASE ISTORY
Release 2.3: parameter vrf <vrf-name> was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
If the VRF name is specified, the packets
will be routed using the routing table of
the specified VRF on a interface
associated with the VRF.
IP address of the remote host.
Host name of the remote host.
Beta
telnet
131