Option Log Server; Option Ntp Server - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

OPTION LOG SERVER

option log-server <ip-address>
D
ESCRIPTION
Enter this command in the DHCP Pool Configuration mode. This command is
used to configure the MIT-LCS UDP log server IP address to be used by the
clients.
P
ARAMETERS
ip-address
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-dhcp-pool-p1)# option log-server 1.1.1.1

OPTION NTP SERVER

option ntp-server <ip-address>
D
ESCRIPTION
Enter this command in the DHCP Pool Configuration mode. This command is
used to configure the IP address of the Network Time Protocol server to be used
by the clients.
P
ARAMETERS
ip-address
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-dhcp-pool-p1)# option ntp-server 1.1.1.1
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
IP address of the log server.
Description
IP address of the Network Time Protocol
server.
Beta
option log server
829