Ip Route - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

IP ROUTE

ip route [vrf <vrf-name>] {destination network subnet-
mask|destination network/prefix-length} {<gateway-ip-
address>|<interface-name> [<gateway-ip-address>]}[<1-255>]
D
ESCRIPTION
This command adds a static routing entry into the specified VRF routing table. If
the VRF name is not specified, then the routing entry is added to the
corresponding Default VRF's routing table.
P
ARAMETERS
vrf-name
{destination network
subnet-mask|destination
network/prefix-length}
gateway-ip-address
interface name
1-255
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip route vrf ALU-vrf 1.1.1.0/24 2.2.2.2
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
The name of the VRF for which the routing
entry is to be added.
The IP address and prefix length of the
destination.
IP address of the next hop.
Name of the next hop interface.
An administrative distance of the route.
ip route
549
Beta