Ip Dhcp Option Time-Offset - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server
IP DHCP OPTION TIME
ip dhcp option time-offset <1-4294967295> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
determine the time variation from GMT (in seconds).
P
ARAMETERS
1-4294967295
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip dhcp option time-offset 100
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
826
Beta
-
OFFSET
Parameter
Alcatel-Lucent
Description
Time variation in seconds.
If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.
OmniAccess 700 CLI Command Reference Guide
Beta