Set Metric; Set Metric-Type - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Protocol Independent Features

SET METRIC

set metric <0-4294967295>
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This sets the metric
value to the redistributed routes. This command is normally used in route-maps
for redistribution.
P
ARAMETERS
Parameter
0-4294967295
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-route-map)# set metric 10
-
SET METRIC TYPE
set metric-type {internal|external|type-1|type-2}
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This command sets
the metric type of the redistributed routes.
P
ARAMETERS
Parameter
internal
external
type-1
type-2
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-route-map)# set metric-type type-1
366
Beta
Metric value.
Internal metric value.
External metric value.
OSPF external type-1 metric.
OSPF external type-2 metric.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Description
Beta